MAX809ZEXR+T
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 174mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Power Supplies | 2.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 17μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.32V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.06mA |
| Min Reset Threshold Voltage | 2.28V |
| Max Reset Threshold Voltage | 2.35V |
| Threshold Voltage | +2.32V |
| Undervoltage Threshold | 2.28V |
| Overvoltage Threshold | 2.35V |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
MAX809ZEXR+T Overview
It is mounted through 3 terminals on the power management. It is packaged with Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. In this PMIC, you can find SC-70, SOT-323 functions for your reference. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, it has 3 pins on IC management. Pin count of the power management is 3. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 17μA. You can always use MAX809, the base supervisor number, to search for similar PMICs of the manufacturer. It is necessary to have 2.5V volts of power in order for this voltage supervisor to operate.
MAX809ZEXR+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
17μA operating supply current
MAX809ZEXR+T Applications
There are a lot of Maxim Integrated MAX809ZEXR+T Voltage Supervisors applications.
- FPGA design
- Low voltage/high power - AI, GPU
- Automotive power systems
- Multi-voltage system
- Electrical fire monitoring system
- Fire equipment power monitoring system
- Functional modules
- Precision measurement
- Digitally controlled LDO regulators circuit
- Military electronics
