MAX810RTRG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MAX810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 800nA |
| Nominal Supply Current | 2.5μA |
| Adjustable Threshold | NO |
| Reset | Active High |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 0.0025mA |
| Min Reset Threshold Voltage | 2.59V |
| Max Reset Threshold Voltage | 2.66V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.63V |
| Overvoltage Threshold | 2.66V |
| Height | 1.01mm |
| Length | 3.04mm |
| Width | 1.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX810RTRG Overview
Power management is mounted through 3 terminals. Packaging is in the form of a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts at a voltage of 3.3V. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. In total, the power management has 3 pins in it. 3 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 1.2V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -40°C~105°C TJ . During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. Supplied with a operating current of 800nA, this PMIC is capable of fully function as specified. To find similar IC managements from the manufacturer, you can always search by MAX810.
MAX810RTRG Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current
MAX810RTRG Applications
There are a lot of ON Semiconductor MAX810RTRG Voltage Supervisors applications.
- Smartphones
- emergency room
- Leakage current detection
- Efficient information transmission
- Consumer electronics
- Power distribution systems of ICU
- Digitally controlled LDO regulators circuit
- Linux and server computing
- Automotive permanent magnet synchronous motors
- DC stabilized power supply module
