MAX810SN120T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | MAX810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 800nA |
| Nominal Supply Current | 2.5μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 0.0025mA |
| Min Reset Threshold Voltage | 1.18V |
| Max Reset Threshold Voltage | 1.22V |
| Threshold Voltage | +1.2V |
| Undervoltage Threshold | 1.2V |
| Overvoltage Threshold | 1.22V |
| Height | 1.01mm |
| Length | 3.04mm |
| Width | 1.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX810SN120T1G Overview
It is mounted through 3 terminals on the power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. For your reference, this IC power includes a list of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. IC management conducts in a 3.3V-voltage supply. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 3 pins that are attached to IC management. Power managment ic pin count is 3. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountIt is recommended to set the supervisor's temperature to this range: -40°C~105°C TJ. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. In order to maintain a stable supply current for the power management, 800nA is the recommended value. A similar IC managements number of the manufacturer can always be found by using MAX810, the base power ics number.
MAX810SN120T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current
MAX810SN120T1G Applications
There are a lot of ON Semiconductor MAX810SN120T1G Voltage Supervisors applications.
- Solar power charger
- Automotive permanent magnet synchronous motors
- Medical-specific insulation monitor
- Military electronics
- Detection of phase loss
- Leakage protection
- Power distribution systems of operating room
- Important electronics for automotive safety
- Satellite navigation
- Smart meter
