Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-236-3, SC-59, SOT-23-3 |
Number of Pins |
3 |
Operating Temperature |
-40°C~105°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2000 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
320mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.95mm |
Base Part Number |
MAX810 |
Output |
Push-Pull, Totem Pole |
Pin Count |
3 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.2V |
Operating Supply Current |
17μA |
Adjustable Threshold |
NO |
Watchdog Timer |
No |
Reset |
Active High |
Voltage - Threshold |
3.08V |
Number of Voltages Monitored |
1 |
Reset Timeout |
140ms Minimum |
Supply Current-Max (Isup) |
0.05mA |
Min Reset Threshold Voltage |
3.04V |
Max Reset Threshold Voltage |
3.11V |
Threshold Voltage |
+3.08V |
Undervoltage Threshold |
3.04V |
Overvoltage Threshold |
3.11V |
Length |
2.92mm |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX810TEUR+T Overview
As you can see, this power management is mounted through 3 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. There are 1 channels available on this supervisor, and each channel has a different function. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When 3.3V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. The power management is mounted by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. There are a total of 3 pins on power management. The pins of the power management system count 3. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.2V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: -40°C~105°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 17μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX810, which is the base power ics number.
MAX810TEUR+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
17μA operating supply current
MAX810TEUR+T Applications
There are a lot of Maxim Integrated MAX810TEUR+T Voltage Supervisors applications.
- FPGA design
- Important electronics for automotive safety
- Electronics installed in the vehicle
- Telecommunications equipment
- Power distribution systems of operating room
- Household appliances
- Embedded computing
- Smartphones
- Utility meter
- Digitally controlled LDO regulators circuit