MAX811LEUS+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX811 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Max Output Current | 20mA |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 6μA |
| Nominal Supply Current | 6μA |
| Power Dissipation | 320mW |
| Max Supply Current | 6A |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.54V |
| Max Reset Threshold Voltage | 4.72V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.54V |
| Overvoltage Threshold | 4.72V |
| Reset Delay Time | 560 ms |
| Height | 940μm |
| Length | 2.92mm |
| Width | 1.3mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX811LEUS+T Overview
Power management is mounted through 4 terminals. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Power management is possible to find a series of 1 functions. It is possible to find on this power management a series of 1 channels. For your reference, this PMIC includes a list of TO-253-4, TO-253AA functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. The package peak reflow temperature is specified to be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by a Surface Mount, Through Hole-axis. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 4 pins in it. The pins of the power management system count 4. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 6μA. To find similar IC managements from the manufacturer, you can always search by MAX811. A power supply of 5V watts is required for the operation of this power management. The maximum supply temperature voltage supervisor can handle is 6A.
MAX811LEUS+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
6μA operating supply current
MAX811LEUS+T Applications
There are a lot of Maxim Integrated MAX811LEUS+T Voltage Supervisors applications.
- DVR
- Battery cars
- Automotive power systems
- Dash board
- Consumer electronics
- Power distribution systems of operating room
- Medical-specific isolation transformer
- Fire equipment power monitoring system
- Functional modules
- Cloud computing
