MAX811REUS+T
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | MAX811 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Power Supplies | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 2.7μA |
| Nominal Supply Current | 2.7μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.58V |
| Max Reset Threshold Voltage | 2.68V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.58V |
| Overvoltage Threshold | 2.68V |
| Height | 1.07mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
MAX811REUS+T Overview
There are 4 mounting terminals on the voltage supervisor, each of which has a different function. Packaging is in the form of a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes TO-253-4, TO-253AA functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. When 3V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. Using Surface Mount, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 4 pins. 4 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 1.2V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount mounting is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 2.7μA. It is always advisable to use MAX811, the base supervisor number, when searching for similar PMICs from the manufacturer. There is a requirement for 3V power to power this power management.
MAX811REUS+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
2.7μA operating supply current
MAX811REUS+T Applications
There are a lot of Maxim Integrated MAX811REUS+T Voltage Supervisors applications.
- Cloud computing
- Electrical fire monitoring system
- Consumer electronics
- Radio
- Digitally controlled LDO regulators circuit
- Display equipment
- Network equipment
- Battery cars
- Analog circuit
- Stable power system
