MAX812SEUS+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | MAX812 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 2.7μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.88V |
| Max Reset Threshold Voltage | 2.98V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.88V |
| Overvoltage Threshold | 2.98V |
| Height | 940μm |
| Length | 2.92mm |
| Width | 1.3mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX812SEUS+T Overview
It is mounted through 4 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. The purpose of this IC management is to provide you with a reference of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a TO-253-4, TO-253AA package. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. A supply voltage of 3.3V is used to conduct the PMIC chip. Power ics operate at 1 supply voltages. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 4 pins in it. This power management system has 4 pins. IC management can only work with a supply voltage of 1.2V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. The power management's supply current is 2.7μA. For similar manage ics search of the manufacturer, you can always refer to MAX812, the base PMIC number. The voltage supervisor requires a power source of 3.3V volts in order to work correctly.
MAX812SEUS+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
2.7μA operating supply current
MAX812SEUS+T Applications
There are a lot of Maxim Integrated MAX812SEUS+T Voltage Supervisors applications.
- Network equipment
- WiFi router
- Leakage current detection
- Embedded computing
- Power distribution systems of infant care room
- Power communication system
- Important electronics for automotive protection
- Precision measurement
- Telecommunications equipment
- Satellite navigation
