MAX813LCPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX813 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 150μA |
| Nominal Supply Current | 150μA |
| Power Dissipation | 727mW |
| Max Supply Current | 350μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX813LCPA+ Overview
Power management is mounted through 8 terminals. Packaged in a Tube-shape, IC management comes with a number of features. In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 2 channels. In this IC management you will find 8-DIP (0.300, 7.62mm) functions for you to refer to. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. Manage ics operate at 5V supply voltages. Power ics operate at 1 supply voltages. The power management is mounted by a Through Hole-axis. There is a subcategory called Power Management Circuits for this power management. A total of 8 pins are located on this power management. The pins of the power management system count 8. IC management can only work with a supply voltage of 1.1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Through Hole. This power management is the recommended temperature range for the supervisors: 0°C~70°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 150μA is the recommended value. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX813, which is the base power ics number. This power management requires 5V power to work. At most, voltage supervisor can operate at a supply temperature of 350μA.
MAX813LCPA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
150μA operating supply current
MAX813LCPA+ Applications
There are a lot of Maxim Integrated MAX813LCPA+ Voltage Supervisors applications.
- Insulation fault location system
- Leakage protection
- Low voltage/high power - AI, GPU
- Medical-specific isolation transformer
- Consumer electronics
- Automotive power systems
- Utility meter
- Battery-powered equipment
- Detection of phase loss
- Power distribution systems of infant care room
