MAX813LCSA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX813 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 350μA |
| Max Supply Current | 350μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX813LCSA+T Overview
A total of 8 terminals are used to mount this power management. Packaging is in the form of a Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. There are a total of 2 channels on this supervisor, and they are arranged in a series. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. When 5V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. 8 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: 0°C~70°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a supply current of 350μA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX813, which is the base power ics number. It requires 5V watts of power to operate this voltage supervisor. The maximum supply temperature that PMIC chip can work with is 350μA.
MAX813LCSA+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
350μA operating supply current
MAX813LCSA+T Applications
There are a lot of Maxim Integrated MAX813LCSA+T Voltage Supervisors applications.
- Functional modules
- Cloud computing
- Microprocessor system
- Transformer load monitoring equipment
- Insulation fault location system
- Important electronics for automotive safety
- Personal computers
- Medical-specific insulation monitor
- Military electronics
- Digitally controlled LDO regulators circuit
