MAX814NEPA+
| Parameters | |
|---|---|
| Reset Timeout | 140 ms |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.6V |
| Threshold Voltage | 4.55V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.6V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 8 |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.55V;MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.6V |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 85μA |
| Max Supply Current | 85μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
MAX814NEPA+ Overview
There are 8 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tube. In this IC power you will find 1 functions for you to refer to. There are 1 channels available on this supervisor, and each channel has a different function. Please find attached DIP functions for your reference in this IC power. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. There is a voltage supply of 4.6V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by a Through Hole-axis. The power management system can be categorized as a Power Management Circuits chip. 8 pins are present in total in this power management. Pin count of the power management is 8. Supply voltage (Vsup) should be at least 1.2V for this power management. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In order to maintain a stable supply current for the power management, 85μA is the recommended value. Supervisors are also additional features, such as [0] for example, which are worth mentioning. A maximum supply temperature of 85μA can be used with this power management.
MAX814NEPA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
85μA operating supply current
MAX814NEPA+ Applications
There are a lot of Maxim Integrated MAX814NEPA+ Voltage Supervisors applications.
- Refrigeration
- Electronics installed in the vehicle
- Electrical fire monitoring system
- DSP
- Cloud computing
- Radar
- Military communications
- Kitchen appliances
- Functional modules
- Detection of phase loss
