MAX814TEPA+
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 8 |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 3.04V;MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.07V |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 85μA |
| Max Supply Current | 85μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140 ms |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.06V |
| Threshold Voltage | 3.03V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.06V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX814TEPA+ Overview
It is mounted through 8 terminals on the power management. Tube-packaging is used. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of DIP functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. The supervisor is always powered by a 3.07V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Through Hole. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 8 pins that are attached to IC management. 8 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The power management's supply current is 85μA. Additionally, IC management are a variety of features, for example [0], to name a few. A maximum supply temperature of 85μA can be used with this power management.
MAX814TEPA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
85μA operating supply current
MAX814TEPA+ Applications
There are a lot of Maxim Integrated MAX814TEPA+ Voltage Supervisors applications.
- Utility meter
- Efficient information transmission
- Kitchen appliances
- Power distribution systems of CCU
- Telecommunications equipment
- Power distribution systems of infant care room
- Embedded computing
- Detection of phase loss
- Low voltage/high power - AI, GPU
- emergency room
