banner_page

MAX815KCSA+

4.86V8 Terminals 8-Pin MAX815 Voltage supervisor1 Channels Min 1V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX815KCSA+
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 828
  • Description: 4.86V8 Terminals 8-Pin MAX815 Voltage supervisor1 Channels Min 1V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Max Power Dissipation 471mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 4.86V
Base Part Number MAX815
Output Push-Pull, Totem Pole
Pin Count 8
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1V
Operating Supply Current 75μA
Max Supply Current 75μA
Adjustable Threshold NO
Watchdog Timer Yes
Reset Active Low
Voltage - Threshold 4.8V
Number of Voltages Monitored 1
Reset Timeout 140ms Minimum
Min Reset Threshold Voltage 4.75V
Max Reset Threshold Voltage 4.85V
Undervoltage Threshold 4.75V
Overvoltage Threshold 4.85V
Length 4.9mm
Width 3.9mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX815KCSA+ Overview


As you can see, this power management is mounted through 8 terminals. It is packaged with Tube. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. In a 4.86V supply voltage, the power management conducts. IC management conducts in a 1-voltage supply. Power management is included in the Surface Mount mount. The power management belongs to the Power Management Circuits subcategory. In total, IC powers are 8 pins on the board. The pins of the power management system count 8. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Mounting type Surface Mount is recommended. This power management is the recommended temperature range for the supervisors: 0°C~70°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. There is a 75μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX815, the base power ics number. The maximum supply temperature voltage supervisor can handle is 75μA.

MAX815KCSA+ Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
75μA operating supply current

MAX815KCSA+ Applications


There are a lot of Maxim Integrated MAX815KCSA+ Voltage Supervisors applications.

  • DVR
  • Set top box
  • Network equipment
  • Multi-voltage system
  • Power distribution systems of CCU
  • Automotive permanent magnet synchronous motors
  • Detection of phase imbalance
  • Military communications
  • Consumer electronics
  • Functional modules

Write a review

Note: HTML is not translated!
    Bad           Good