MAX815KESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.86V |
| Base Part Number | MAX815 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 85μA |
| Max Supply Current | 85μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.8V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.75V |
| Max Reset Threshold Voltage | 4.85V |
| Undervoltage Threshold | 4.75V |
| Overvoltage Threshold | 4.85V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX815KESA+ Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Tube-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 4.86V supply voltages. IC management conducts in a 1-voltage supply. The power management is mounted by a Surface Mount-axis. The power management system can be categorized as a Power Management Circuits chip. In total, it has 8 pins on IC management. 8 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The power management's supply current is 85μA. A similar IC managements number of the manufacturer can always be found by using MAX815, the base power ics number. At most, voltage supervisor can operate at a supply temperature of 85μA.
MAX815KESA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
85μA operating supply current
MAX815KESA+ Applications
There are a lot of Maxim Integrated MAX815KESA+ Voltage Supervisors applications.
- Important electronics for automotive protection
- Automotive power systems
- Power distribution systems of ICU
- emergency room
- Urban rail transit weak current power monitoring
- Military electronics
- Unattended substation automation
- Fire equipment power monitoring system
- Leakage protection
- Battery cars
