banner_page

MAX815NCPA+

4.6V8 Terminals 8-Pin MAX815 Voltage supervisor1 Channels Min 1V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX815NCPA+
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 927
  • Description: 4.6V8 Terminals 8-Pin MAX815 Voltage supervisor1 Channels Min 1V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Max Power Dissipation 727mW
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 4.6V
Terminal Pitch 2.54mm
Base Part Number MAX815
Output Push-Pull, Totem Pole
Pin Count 8
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1V
Operating Supply Current 75μA
Max Supply Current 75μA
Adjustable Threshold NO
Watchdog Timer Yes
Reset Active Low
Voltage - Threshold 4.55V
Number of Voltages Monitored 1
Reset Timeout 140ms Minimum
Min Reset Threshold Voltage 4.5V
Max Reset Threshold Voltage 4.6V
Undervoltage Threshold 4.5V
Overvoltage Threshold 4.6V
Height Seated (Max) 4.572mm
Length 9.375mm
Width 7.62mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX815NCPA+ Overview


There are 8 mounting terminals on the voltage supervisor, each of which has a different function. This power ic is packaged in a way that looks like a Tube. To assist you, this IC power includes 1 functions. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of 8-DIP (0.300, 7.62mm) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. As specified in the package specification, the peak reflow temperature of the package is set at 260. In a 4.6V supply voltage, the power management conducts. Power management conducts at a voltage of 1. The mount is attached to Through Hole. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 8 pins on power management. Pin count of the power management is 8. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Through Hole is the recommended mounting type. Temperature setting for the supervisors should be 0°C~70°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. For this power management, there is an 75μA volt supply current. For similar manage ics search of the manufacturer, you can always refer to MAX815, the base PMIC number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 75μA.

MAX815NCPA+ Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
75μA operating supply current

MAX815NCPA+ Applications


There are a lot of Maxim Integrated MAX815NCPA+ Voltage Supervisors applications.

  • Battery cars
  • Multi-voltage system
  • DSP
  • Leakage protection
  • DC stabilized power supply module
  • Urban rail transit weak current power monitoring
  • Leakage current detection
  • Insulation fault location system
  • Unattended substation automation
  • Microcontroller system

Write a review

Note: HTML is not translated!
    Bad           Good