MAX815NCSA+
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.6V |
| Base Part Number | MAX815 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 75μA |
| Max Supply Current | 75μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.55V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.6V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.6V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
MAX815NCSA+ Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Tube-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. When a supply voltage of 4.6V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. A total of 8 pins are located on this power management. The pins of the power management system count 8. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: 0°C~70°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 75μA. For similar manage ics search of the manufacturer, you can always refer to MAX815, the base PMIC number. The maximum supply temperature is 75μA.
MAX815NCSA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
75μA operating supply current
MAX815NCSA+ Applications
There are a lot of Maxim Integrated MAX815NCSA+ Voltage Supervisors applications.
- FPGA design
- Sensitive sensors
- Functional modules
- Digitally controlled LDO regulators circuit
- Detection of phase sequence
- Data storage applications
- DVR
- Refrigeration
- Radio
- Analog circuit
