MAX815TEPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 3.04V;MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.07V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX815 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 85μA |
| Max Supply Current | 85μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 3.03V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.06V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.06V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX815TEPA+ Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Tube-packaging is used. For your reference, this IC power includes a list of 1 functions. Power management consists of 1 channels, each of which can be used independently. There are 8-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 3.07V. IC management is possible to find a succession of 1 voltages that have been checked. The mount is provided by Through Hole. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 8. Pin count of the power management is 8. IC management can only work with a supply voltage of 1.2V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). In this case, Through Hole is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The power management's supply current is 85μA. There are other features such as RESET THRESHOLD VOLTAGE IS 3.04V;MANUAL RESET INPUT to name a few. For similar manage ics search of the manufacturer, you can always refer to MAX815, the base PMIC number. The maximum supply temperature is 85μA.
MAX815TEPA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
85μA operating supply current
MAX815TEPA+ Applications
There are a lot of Maxim Integrated MAX815TEPA+ Voltage Supervisors applications.
- Detection of phase sequence
- Automotive power systems
- Utility meter
- Functional modules
- Efficient information transmission
- Battery cars
- emergency room
- Set top box
- Insulation fault location system
- Microcontroller system
