MAX816ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET OPTION |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | MAX816 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 85μA |
| Max Supply Current | 85μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX816ESA+ Overview
As you can see, this power management is mounted through 8 terminals. It is packaged with Tube. Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. IC management conducts at a voltage of 3V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount is the one that mounts power management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. A total of 8 pins are located on this power management. This power management system has 8 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~85°C TA degrees. The output voltage of this power managment ic during operation is Push-Pull, Push-Pull. It is estimated that the voltage supervisor's supply current is 85μA. The other features include, for example, [0], which is just one example. A similar IC managements number of the manufacturer can always be found by using MAX816, the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 85μA.
MAX816ESA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
85μA operating supply current
MAX816ESA+ Applications
There are a lot of Maxim Integrated MAX816ESA+ Voltage Supervisors applications.
- Magnetic resonance imaging
- Microprocessor system
- emergency room
- Consumer electronics
- Microcontroller system
- DC stabilized power supply module
- Electric heating appliances
- Radio
- Power distribution systems of infant care room
- FPGA design
