MAX818LCPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX818 |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 11μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.045mA |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX818LCPA+ Overview
As you can see, this power management is mounted through 8 terminals. Packaged in the form of a Tube, power management is easy to use. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. Please find attached 8-DIP (0.300, 7.62mm) functions for your reference in this IC power. This IC power shares lots of benefits with other Battery Backup Circuit products. IC management is specified that the package peak reflow temperature should be 260. IC management conducts in a 4.75V-voltage supply. IC management is possible to find a succession of 1 voltages that have been checked. By Through Hole, IC management has been mounted. There is a subcategory called Power Management Circuits for this power management. The total number of pins on this power management is 8. This power management system has 8 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 0V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type is Through Hole. This range of temperature should be set for the supervisors: 0°C~70°C TA. The supervisor's supply current is specified to 11μA. A similar IC managements number of the manufacturer can always be found by using MAX818, the base power ics number. The voltage supervisor requires a power source of 5V volts in order to work correctly.
MAX818LCPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
11μA operating supply current
MAX818LCPA+ Applications
There are a lot of Maxim Integrated MAX818LCPA+ Voltage Supervisors applications.
- Utility meter
- Cloud computing
- Radar
- DVR
- Efficient information transmission
- Transformer load monitoring equipment
- Power distribution systems of infant care room
- Solar power charger
- Set top box
- Automotive permanent magnet synchronous motors
