Parameters |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
4.75V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX818 |
Pin Count |
8 |
Power Supplies |
5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
0V |
Operating Supply Current |
11μA |
Adjustable Threshold |
NO |
Watchdog Timer |
Yes |
Reset |
Active Low |
Voltage - Threshold |
4.65V |
Number of Voltages Monitored |
1 |
Reset Timeout |
140ms Minimum |
Supply Current-Max (Isup) |
0.045mA |
Min Reset Threshold Voltage |
4.5V |
Max Reset Threshold Voltage |
4.75V |
Undervoltage Threshold |
4.5V |
Overvoltage Threshold |
4.75V |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Battery Backup Circuit |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
330mW |
Technology |
CMOS |
MAX818LCUA+ Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Power management is packaged in a Tube way. In this IC power you will find 1 functions for you to refer to. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. There are a lot of similarities between this IC management and other Battery Backup Circuit products. During the reflow process, a peak temperature of 260 is specified for the package. IC management conducts in a 4.75V-voltage supply. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. Power managment ic pin count is 8. It is recommended that Vsup should not be less than 0V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The mounting type of the supervisors is Surface MountThis power management is the recommended temperature range for the supervisors: 0°C~70°C TA. The supervisor's supply current is specified to 11μA. A similar IC managements number of the manufacturer can always be found by using MAX818, the base power ics number. The voltage supervisor requires a power source of 5V volts in order to work correctly.
MAX818LCUA+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
11μA operating supply current
MAX818LCUA+ Applications
There are a lot of Maxim Integrated MAX818LCUA+ Voltage Supervisors applications.
- Network equipment
- Sensitive sensors
- Important electronics for automotive safety
- Household appliances
- Utility meter
- Battery cars
- Precision measurement
- Smartphones
- Analog circuit
- Insulation fault location system