MAX819LCUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 330mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX819 |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 11μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.045mA |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX819LCUA+ Overview
A total of 8 terminals are used to mount this power management. Tube-packaging is used. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. This IC power shares lots of benefits with other Battery Backup Circuit products. According to the specification, the package's peak reflow temperature is specified to be 260. There is a voltage supply of 4.75V for the PMIC chip, and the chip conducts at that voltage. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts power management on the wall. Power Management Circuits is a subcategory of this PMIC chip. A total of 8 pins are located on this power management. This power management system has 8 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 0V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: 0°C~70°C TA. There is a supply current of 11μA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX819, which is the base power ics number. It is necessary to have 5V volts of power in order for this voltage supervisor to operate.
MAX819LCUA+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
11μA operating supply current
MAX819LCUA+ Applications
There are a lot of Maxim Integrated MAX819LCUA+ Voltage Supervisors applications.
- Precision measurement
- Personal computers
- Unattended substation automation
- emergency room
- Digitally controlled LDO regulators circuit
- Multi-voltage system
- Power distribution systems of infant care room
- Power distribution systems of CCU
- Power distribution systems of operating room
- Display equipment
