MAX819LEPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX819 |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 11μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.06mA |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX819LEPA+ Overview
It is mounted through 8 terminals on the power management. This power ic is packaged in a way that looks like a Tube. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. There are 8-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 4.75V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Power management is included in the Through Hole mount. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 8 pins on the board. This power management has 8 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 0V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management' mounting is recommended to be done with the Through Hole type of mounting. We recommend setting the supervisors to -40°C~85°C TA degrees. The supervisor's supply current is specified to 11μA. For similar manage ics search of the manufacturer, you can always refer to MAX819, the base PMIC number. To operate this power management, you will need at least 5V volts of power.
MAX819LEPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
11μA operating supply current
MAX819LEPA+ Applications
There are a lot of Maxim Integrated MAX819LEPA+ Voltage Supervisors applications.
- Efficient information transmission
- Military communications
- Embedded computing
- Solar power charger
- Military electronics
- Digitally controlled LDO regulators circuit
- Automotive power systems
- Kitchen appliances
- Medical-specific insulation monitor
- Power distribution systems of infant care room
