Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Battery Backup Circuit |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
727mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Terminal Pitch |
2.54mm |
Base Part Number |
MAX819 |
Pin Count |
8 |
Power Supplies |
5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
0V |
Operating Supply Current |
11μA |
Adjustable Threshold |
NO |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
4.4V |
Number of Voltages Monitored |
1 |
Reset Timeout |
140ms Minimum |
Supply Current-Max (Isup) |
0.045mA |
Min Reset Threshold Voltage |
4.25V |
Max Reset Threshold Voltage |
4.5V |
Undervoltage Threshold |
4.25V |
Overvoltage Threshold |
4.5V |
Height Seated (Max) |
4.572mm |
Length |
9.375mm |
Width |
7.62mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX819MCPA+ Overview
There are 8 terminals connected to this power management, which makes it easy to mount. A Tube package is used to package the power management. Please find attached 1 functions for your reference in this IC power. This power managment ic consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 8-DIP (0.300, 7.62mm) functions. There are a lot of similarities between this IC power and other Battery Backup Circuit products. During the reflow process, a peak temperature of 260 is specified for the package. IC management conducts in a 4.5V-voltage supply. Power ics operate at 1 supply voltages. By Through Hole, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 8. 8 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 0V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Through Hole type of mounting. The temperature of the supervisors should be set to this range: 0°C~70°C TA. The power management's supply current is 11μA. A similar IC managements number of the manufacturer can always be found by using MAX819, the base power ics number. It requires 5V watts of power to operate this voltage supervisor.
MAX819MCPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
11μA operating supply current
MAX819MCPA+ Applications
There are a lot of Maxim Integrated MAX819MCPA+ Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Detection of phase imbalance
- Medical-specific insulation monitor
- Display equipment
- Detection of phase sequence
- Precision measurement
- Smartphones
- DC stabilized power supply module
- Efficient information transmission
- DVR