MAX820LCSE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX820 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.75V |
| Operating Supply Current | 150μA |
| Max Supply Current | 150μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.62V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX820LCSE+ Overview
As you can see, this power management is mounted through 16 terminals. A Tube package is used to package the power management. For your reference, this IC power includes a list of 1 functions. On this supervisor, there is a series of 1 channels that can be found. There are 16-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 5V supply voltages. Power ics operate at 1 supply voltages. Using Surface Mount, IC management is mounted. This power ic can be sub-categorized as Power Management Circuits. 16 pins are present in total in this power management. 16 pins are on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2.75V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: 0°C~70°C TA. The output voltage of this power managment ic during operation is Push-Pull, Push-Pull. The power management's supply current is 150μA. A similar IC managements number of the manufacturer can always be found by using MAX820, the base power ics number. There is a requirement for 3/5V power to power this power management. At the most, voltage supervisor can work with a supply temperature of 150μA.
MAX820LCSE+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.75V
150μA operating supply current
MAX820LCSE+ Applications
There are a lot of Maxim Integrated MAX820LCSE+ Voltage Supervisors applications.
- Radar
- Telecommunications equipment
- Medical-specific insulation monitor
- Important electronics for automotive protection
- Radio
- Satellite navigation
- Multi-voltage system
- Power communication system
- Microcontroller system
- Power distribution systems of CCU
