banner_page

MAX820LESE+

5V16 Terminals 16-Pin MAX820 Voltage supervisor1 Channels Min 2.75V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX820LESE+
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 673
  • Description: 5V16 Terminals 16-Pin MAX820 Voltage supervisor1 Channels Min 2.75V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Max Power Dissipation 762mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number MAX820
Output Push-Pull, Push-Pull
Pin Count 16
Power Supplies 3/5V
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 2.75V
Operating Supply Current 150μA
Max Supply Current 150μA
Adjustable Threshold NO
Watchdog Timer Yes
Reset Active High/Active Low
Voltage - Threshold 4.62V
Number of Voltages Monitored 1
Reset Timeout 140ms Minimum
Min Reset Threshold Voltage 4.5V
Max Reset Threshold Voltage 4.75V
Undervoltage Threshold 4.5V
Overvoltage Threshold 4.75V
Length 9.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX820LESE+ Overview


There are 16 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tube. To assist you, this IC power includes 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. There are 16-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. The supervisor is always powered by a 5V volt supply. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 16 pins on IC management. Pin count of the power management is 16. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 2.75V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Push-Pull. In order to maintain a stable supply current for the power management, 150μA is the recommended value. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX820, which is the base power ics number. To be able to work, this power management requires 3/5V volts of power. The maximum supply temperature is 150μA.

MAX820LESE+ Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 2.75V
150μA operating supply current

MAX820LESE+ Applications


There are a lot of Maxim Integrated MAX820LESE+ Voltage Supervisors applications.

  • Unattended substation automation
  • DC stabilized power supply module
  • Personal computers
  • Display equipment
  • Radar
  • Important electronics for automotive protection
  • Electrical fire monitoring system
  • emergency room
  • Smartphones
  • Automotive power systems

Write a review

Note: HTML is not translated!
    Bad           Good