MAX820RCSE+
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX820 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.75V |
| Operating Supply Current | 150μA |
| Max Supply Current | 150μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.61V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
MAX820RCSE+ Overview
It is mounted through 16 terminals on the power management. There is a Tube-packaging method applied to IC management. For your reference, this IC power includes a list of 1 functions. This power management is made up of 1 channels which are available in a series format. Please refer to power management for 16-SOIC (0.154, 3.90mm Width) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 5V volt supply. IC management conducts in a 1-voltage supply. Using Surface Mount, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. A total of 16 pins are located on this power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 2.75V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: 0°C~70°C TA. During normal operation, this power managment ic can generate Push-Pull, Push-Pull of output voltage. There is a 150μA supply current present in the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX820, which is the base power ics number. The voltage supervisor requires a power source of 3/5V volts in order to work correctly. The maximum supply temperature is 150μA.
MAX820RCSE+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.75V
150μA operating supply current
MAX820RCSE+ Applications
There are a lot of Maxim Integrated MAX820RCSE+ Voltage Supervisors applications.
- FPGA design
- Military electronics
- Precision measurement
- Detection of phase imbalance
- Urban rail transit weak current power monitoring
- Microcontroller system
- Unattended substation automation
- Consumer electronics
- External alarm
- DSP
