MAX820RESE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX820 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.75V |
| Operating Supply Current | 150μA |
| Max Supply Current | 150μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.61V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX820RESE+ Overview
A total of 16 terminals are used to mount this power management. Packaging is in the form of a Tube. In this PMIC, you can find 1 functions for your reference. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 16-SOIC (0.154, 3.90mm Width) functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 5V is used to conduct the PMIC chip. IC management conducts in a 1-voltage supply. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 16 pins that are attached to IC management. This power management system has 16 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2.75V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. Power management has an output of Push-Pull, Push-Pull during operation. For this power management, there is an 150μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX820, which is the base power ics number. The power management must be powered by 3/5V volts to function properly. A maximum supply temperature of 150μA can be used with this power management.
MAX820RESE+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.75V
150μA operating supply current
MAX820RESE+ Applications
There are a lot of Maxim Integrated MAX820RESE+ Voltage Supervisors applications.
- Fire equipment power monitoring system
- Detection of phase loss
- Electric heating appliances
- Battery cars
- Magnetic resonance imaging
- Personal computers
- Utility meter
- Microcontroller system
- Efficient information transmission
- Set top box
