MAX820SCPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 842mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX820 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.75V |
| Operating Supply Current | 150μA |
| Max Supply Current | 150μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.91V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX820SCPE+ Overview
This power management consists of 16 mounting terminals on which it can be mounted. Tube-packaging is used. As a reference, this IC management includes 1 functions for your convenience. This power management is made up of 1 channels which are available in a series format. For your reference, this PMIC includes a list of 16-DIP (0.300, 7.62mm) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts at a voltage of 5V. Power ics operate at 1 supply voltages. The power management is mounted by a Through Hole-axis. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. A total of 16 pins are located on this power management. The pins of the power management system count 16. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2.75V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Through Hole. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Push-Pull. It is estimated that the voltage supervisor's supply current is 150μA. For similar manage ics search of the manufacturer, you can always refer to MAX820, the base PMIC number. To be able to work, this power management requires 3/5V volts of power. At the most, voltage supervisor can work with a supply temperature of 150μA.
MAX820SCPE+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.75V
150μA operating supply current
MAX820SCPE+ Applications
There are a lot of Maxim Integrated MAX820SCPE+ Voltage Supervisors applications.
- Unattended substation automation
- emergency room
- Power distribution systems of CCU
- Microcontroller system
- DVR
- DSP
- Battery-powered equipment
- Radar
- Utility meter
- Leakage protection
