MAX820TCSE+
| Parameters | |
|---|---|
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 3.06V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX820 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.75V |
| Operating Supply Current | 150μA |
| Max Supply Current | 150μA |
| Adjustable Threshold | NO |
MAX820TCSE+ Overview
This power management consists of 16 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tube. As a reference, this IC management includes 1 functions for your convenience. A series of 1 channels can be found on this supervisor. To assist you, this PMIC includes 16-SOIC (0.154, 3.90mm Width) functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. Manage ics operate at 5V supply voltages. Power management conducts at a voltage of 1. Surface Mount mounts IC management. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 16 pins are located on this power management. Power managment ic pin count is 16. It is recommended that Vsup should not be less than 2.75V for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: 0°C~70°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Push-Pull. The supervisor's supply current is specified to 150μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX820, which is the base power ics number. In order to operate this power management, it requires 3/5V volts of power. A maximum supply temperature of 150μA can be used with this power management.
MAX820TCSE+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.75V
150μA operating supply current
MAX820TCSE+ Applications
There are a lot of Maxim Integrated MAX820TCSE+ Voltage Supervisors applications.
- Leakage current detection
- External alarm
- Display equipment
- FPGA design
- Data storage applications
- Power communication system
- Sensitive sensors
- Radio
- Medical-specific insulation monitor
- DSP
