MAX8211CPA+
| Parameters | |
|---|---|
| Max Reset Threshold Voltage | 1.19V |
| Undervoltage Threshold | 1.11V |
| Overvoltage Threshold | 1.19V |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX8211 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Output Voltage | 18V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 15μA |
| Power Dissipation | 727mW |
| Max Supply Current | 15μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | <1ms Minimum |
| Min Reset Threshold Voltage | 1.11V |
MAX8211CPA+ Overview
This power management consists of 8 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tube. Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. In this IC management you will find 8-DIP (0.300, 7.62mm) functions for you to refer to. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. As specified in the package specification, the peak reflow temperature of the package is set at 260. Manage ics operate at 5V supply voltages. A supply voltage of 1 is used to conduct the PMIC chip. Through Hole mounts IC management. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 8 pins on the board. This power management has 8 pins. It is recommended that Vsup should not be less than 2V for this IC power. The supply voltage (Vsup) should not exceed 16.5V volts in this IC power. The recommended mounting type for IC management is Through Hole. This power management is the recommended temperature range for the supervisors: 0°C~70°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. For this power management, there is an 15μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX8211, which is the base power ics number. A power supply of 5V watts is required for the operation of this power management. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 15μA.
MAX8211CPA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
15μA operating supply current
MAX8211CPA+ Applications
There are a lot of Maxim Integrated MAX8211CPA+ Voltage Supervisors applications.
- Sensitive sensors
- Military communications
- Functional modules
- DC stabilized power supply module
- Kitchen appliances
- Electric heating appliances
- Data storage applications
- Refrigeration
- Power communication system
- Insulation fault location system
