MAX8211CSA+
| Parameters | |
|---|---|
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX8211 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Output Voltage | 18V |
| Max Output Current | 30mA |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 5μA |
| Nominal Supply Current | 5μA |
| Power Dissipation | 471mW |
| Max Supply Current | 15μA |
| Adjustable Threshold | YES |
| Accuracy | 3.5 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | <1ms Minimum |
| Min Reset Threshold Voltage | 1.11V |
| Max Reset Threshold Voltage | 1.19V |
| Undervoltage Threshold | 1.11V |
| Overvoltage Threshold | 1.19V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
MAX8211CSA+ Overview
There are 8 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tube. In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 5V is used to conduct the PMIC chip. Power management conducts at a voltage of 1. Surface Mount is the one that mounts power management. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 8 pins on IC management. Power managment ic pin count is 8. Supply voltage (Vsup) should be at least 2V for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 16.5V volts. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: 0°C~70°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The supply current of the power management is 5μA. A similar IC managements number of the manufacturer can always be found by using MAX8211, the base power ics number. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. The power management can work with a maximum supply temperature of 15μA.
MAX8211CSA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
5μA operating supply current
MAX8211CSA+ Applications
There are a lot of Maxim Integrated MAX8211CSA+ Voltage Supervisors applications.
- Embedded computing
- FPGA design
- Power distribution systems of infant care room
- Detection of phase imbalance
- Functional modules
- Multi-voltage system
- Battery cars
- Linux and server computing
- Data storage applications
- Efficient information transmission
