MAX8211MSA/PR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX8211 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 5μA |
| Max Supply Current | 15μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | <1ms Minimum |
| Min Reset Threshold Voltage | 1.11V |
| Max Reset Threshold Voltage | 1.19V |
| Threshold Voltage | +1.15V |
| Undervoltage Threshold | 1.11V |
| Overvoltage Threshold | 1.19V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX8211MSA/PR Overview
There are 8 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tube. Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. IC management is specified that the package peak reflow temperature should be 225. A supply voltage of 5V is used to conduct the PMIC chip. Power management conducts at a voltage of 1. Using Surface Mount, IC management is mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 8. This power management system has 8 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2V, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 16.5V volts in this PMIC. Power management' mounting is recommended to be done with the Surface Mount type of mounting. You should set the supervisor's temperature during -55°C~125°C TA . As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 5μA is the recommended value. For similar manage ics search of the manufacturer, you can always refer to MAX8211, the base PMIC number. The power management must be powered by 5V volts to function properly. Voltage supervisor can work with a supply temperature of 15μA at the most.
MAX8211MSA/PR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
5μA operating supply current
MAX8211MSA/PR Applications
There are a lot of Maxim Integrated MAX8211MSA/PR Voltage Supervisors applications.
- Display equipment
- Electronics installed in the vehicle
- Transformer load monitoring equipment
- Battery-powered equipment
- Consumer electronics
- Detection of phase imbalance
- Leakage current detection
- Electric heating appliances
- Electrical fire monitoring system
- Dash board
