banner_page

MAX8212CPA+

5V8 Terminals 8-Pin MAX8212 Voltage supervisor1 Channels Min 2V Max 16.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX8212CPA+
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 600
  • Description: 5V8 Terminals 8-Pin MAX8212 Voltage supervisor1 Channels Min 2V Max 16.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount DIP, Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 1995
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Voltage - Rated DC 18V
Max Power Dissipation 727mW
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number MAX8212
Output Open Drain or Open Collector
Pin Count 8
Max Output Current 35mA
Power Supplies 5V
Number of Channels 1
Max Supply Voltage 16.5V
Min Supply Voltage 2V
Operating Supply Current 15μA
Nominal Supply Current 5μA
Power Dissipation 727mW
Max Supply Current 15μA
Adjustable Threshold YES
Watchdog Timer No
Reset Active Low
Voltage - Threshold Adjustable/Selectable
Number of Voltages Monitored 1
Reset Timeout <1ms Minimum
Min Reset Threshold Voltage 1.11V
Max Reset Threshold Voltage 1.19V
Undervoltage Threshold 1.11V
Overvoltage Threshold 1.19V
Height 4.45mm
Length 9.91mm
Width 7.87mm
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX8212CPA+ Overview


It is mounted through 8 terminals on the power management. There is a Tube-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 8-DIP (0.300, 7.62mm) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. In a 5V supply voltage, the power management conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by DIP, Through Hole. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 8 pins on the board. Power managment ic pin count is 8. There should be a minimum voltage supply (Vsup) of 2V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 16.5V volts. Power management' mounting is recommended to be done with the Through Hole type of mounting. We recommend setting the supervisors to 0°C~70°C TA degrees. During operation, this power management system outputs Open Drain or Open Collector. There is a supply current of 15μA for the power management. You can always use MAX8212, the base supervisor number, to search for similar PMICs of the manufacturer. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. The power management can work with a maximum supply temperature of 15μA.

MAX8212CPA+ Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
15μA operating supply current

MAX8212CPA+ Applications


There are a lot of Maxim Integrated MAX8212CPA+ Voltage Supervisors applications.

  • Cloud computing
  • Consumer electronics
  • Sensitive sensors
  • Refrigeration
  • Battery-powered equipment
  • Analog circuit
  • Electrical fire monitoring system
  • Battery cars
  • Urban rail transit weak current power monitoring
  • WiFi router

Write a review

Note: HTML is not translated!
    Bad           Good