Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
2003 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
471mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX8212 |
Output |
Open Drain or Open Collector |
Pin Count |
8 |
Output Voltage |
18V |
Max Output Current |
35mA |
Power Supplies |
5V |
Number of Channels |
1 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
2V |
Operating Supply Current |
15μA |
Nominal Supply Current |
5μA |
Power Dissipation |
471mW |
Max Supply Current |
15μA |
Adjustable Threshold |
YES |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
Adjustable/Selectable |
Number of Voltages Monitored |
1 |
Reset Timeout |
<1ms Minimum |
Min Reset Threshold Voltage |
1.11V |
Max Reset Threshold Voltage |
1.19V |
Undervoltage Threshold |
1.11V |
Overvoltage Threshold |
1.19V |
Height |
1.5mm |
Length |
5mm |
Width |
4mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX8212CSA+ Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Power management is packaged in a Tube way. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts in a 5V-voltage supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 8 pins. There are 8 pins on the supervisor. Supply voltage (Vsup) should be at least 2V for this power management. This IC power should be powered by no more than 16.5V volts of supply voltage (Vsup). In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: 0°C~70°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. It is always advisable to use MAX8212, the base supervisor number, when searching for similar PMICs from the manufacturer. It requires 5V watts of power to operate this voltage supervisor. At most, voltage supervisor can operate at a supply temperature of 15μA.
MAX8212CSA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
15μA operating supply current
MAX8212CSA+ Applications
There are a lot of Maxim Integrated MAX8212CSA+ Voltage Supervisors applications.
- Set top box
- Efficient information transmission
- Microcontroller system
- Digitally controlled LDO regulators circuit
- Insulation fault location system
- Medical-specific insulation monitor
- Radar
- Household appliances
- Transformer load monitoring equipment
- Refrigeration