MAX8212EPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | DIP, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | MATTE TIN |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX8212 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 15μA |
| Max Supply Current | 15μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | <1ms Minimum |
| Min Reset Threshold Voltage | 1.11V |
| Max Reset Threshold Voltage | 1.19V |
| Threshold Voltage | +1.15V |
| Undervoltage Threshold | 1.11V |
| Overvoltage Threshold | 1.19V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX8212EPA+ Overview
This power management consists of 8 mounting terminals on which it can be mounted. Power management is packaged in a Tube way. Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of 8-DIP (0.300, 7.62mm) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. There is a specification for the peak reflow temperature of the package to be 260. When 5V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. The power management is mounted by a DIP, Through Hole-axis. There is a subcategory called Power Management Circuits for this power management. Taking into account all of the pins, this power management has a total of 8. Pin count of the power management is 8. Supply voltage (Vsup) should be at least 2V for this power management. In this PMIC, the maximum supply voltage (Vsup) should not exceed 16.5V volts. The recommended mounting type for IC management is Through Hole. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The power management's supply current is 15μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX8212, which is the base power ics number. To operate this power management, you will need at least 5V volts of power. Voltage supervisor can work with a supply temperature of 15μA at the most.
MAX8212EPA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
15μA operating supply current
MAX8212EPA+ Applications
There are a lot of Maxim Integrated MAX8212EPA+ Voltage Supervisors applications.
- Multi-voltage system
- Detection of phase imbalance
- DC stabilized power supply module
- Stable power system
- Important electronics for automotive safety
- Insulation fault location system
- Network equipment
- Digitally controlled LDO regulators circuit
- Computer applications
- Automotive permanent magnet synchronous motors
