MAX8213ACPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | DIP, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | MATTE TIN |
| Additional Feature | 4 PRECISION VOLTAGE COMPARATOR FOR UNDERVOLTAGE/OVERVOLTAGE MONITORING |
| Max Power Dissipation | 842mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX8213 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Number of Channels | 5 |
| Max Supply Voltage | 11V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 16μA |
| Nominal Supply Current | 16μA |
| Power Dissipation | 842mW |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 5Adjustable Threshold Voltages |
| Number of Voltages Monitored | 5 |
| Reset Timeout | <1ms Minimum |
| Supply Current-Max (Isup) | 0.033mA |
| Max Reset Threshold Voltage | 2.828V |
| Height | 4.45mm |
| Length | 19.43mm |
| Width | 7.87mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX8213ACPE+ Overview
This power management consists of 16 mounting terminals on which it can be mounted. Packaging is in the form of a Tube. The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 5 channels which are available in a series format. Please find attached 16-DIP (0.300, 7.62mm) functions for your reference in this IC power. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. IC management is specified that the package peak reflow temperature should be 260. Manage ics operate at 5V supply voltages. A supply voltage of 5 is used to conduct the PMIC chip. By DIP, Through Hole, IC management has been mounted. Taking into account all of the pins, this power management has a total of 16. This power management has 16 pins. A voltage (Vsup) that doesn't fall below 2.7V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 11V volts in this IC power. Mounting type Through Hole is recommended. This range of temperature should be set for the supervisors: 0°C~70°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. Supplied with a operating current of 16μA, this PMIC is capable of fully function as specified. The other features include, for example, [0], which is just one example. A similar IC managements number of the manufacturer can always be found by using MAX8213, the base power ics number.
MAX8213ACPE+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
16μA operating supply current
MAX8213ACPE+ Applications
There are a lot of Maxim Integrated MAX8213ACPE+ Voltage Supervisors applications.
- Unattended substation automation
- Digitally controlled LDO regulators circuit
- Battery-powered equipment
- DSP
- Power communication system
- DVR
- Analog circuit
- emergency room
- Smart meter
- Utility meter
