MAX8213AESE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 547.485991mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | 4 PRECISION VOLTAGE COMPARATOR FOR UNDERVOLTAGE/OVERVOLTAGE MONITORING |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX8213 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Number of Channels | 5 |
| Max Supply Voltage | 11V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 16μA |
| Max Supply Current | 16A |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 5Adjustable Threshold Voltages |
| Number of Voltages Monitored | 5 |
| Reset Timeout | <1ms Minimum |
| Max Reset Threshold Voltage | 3.022V |
| Threshold Voltage | +1.25V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX8213AESE+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. Packaged in the form of a Tube, power management is easy to use. Power management is possible to find a series of 1 functions. There are 5 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of 16-SOIC (0.154, 3.90mm Width) functions. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. IC management conducts at a voltage of 5V. There is a voltage supply of 5 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts IC management. This power ic can be sub-categorized as Power Management Circuits. It has a total of 16 pins that are attached to IC management. There are 16 pins on the supervisor. A voltage (Vsup) that doesn't fall below 2.7V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) in this PMIC should not exceed 11V volts. Surface Mount mounting is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. There is a 16μA supply current present in the power management. Additionally, IC management are a variety of features, for example [0], to name a few. A similar IC managements number of the manufacturer can always be found by using MAX8213, the base power ics number. At most, voltage supervisor can operate at a supply temperature of 16A.
MAX8213AESE+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
16μA operating supply current
MAX8213AESE+ Applications
There are a lot of Maxim Integrated MAX8213AESE+ Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Electric heating appliances
- Kitchen appliances
- Unattended substation automation
- Military communications
- Dash board
- Automotive power systems
- Automotive permanent magnet synchronous motors
- Network equipment
- Embedded computing
