MAX8214AESE+
| Parameters | |
|---|---|
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | TIN |
| Additional Feature | 4 PRECISION VOLTAGE COMPARATOR FOR UNDERVOLTAGE/OVERVOLTAGE MONITORING |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX8214 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 16 |
| Number of Channels | 5 |
| Max Supply Voltage | 11V |
| Min Supply Voltage | 2.85V |
| Operating Supply Current | 16μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 5Adjustable Threshold Voltages |
| Number of Voltages Monitored | 5 |
| Reset Timeout | <1ms Minimum |
| Supply Current-Max (Isup) | 0.033mA |
| Length | 9.9mm |
| Width | 3.9mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
MAX8214AESE+ Overview
Power management is mounted through 16 terminals. Tube-packaging is used. To assist you, this IC power includes 1 functions. This power management is made up of 5 channels which are available in a series format. In this IC management you will find 16-SOIC (0.154, 3.90mm Width) functions for you to refer to. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. According to the specification, the package's peak reflow temperature is specified to be 260. When a supply voltage of 5V is applied to the power ic, it conducts. A supply voltage of 5 is used to conduct the PMIC chip. The mount is attached to Surface Mount. There are a total of 16 pins on power management. This power management system has 16 pins. Supply voltage (Vsup) should be at least 2.85V for this power management. There should be no more than 11V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. Supplied with a operating current of 16μA, this PMIC is capable of fully function as specified. As well as this, there are other features to mention such as [0], for example. A similar IC managements number of the manufacturer can always be found by using MAX8214, the base power ics number.
MAX8214AESE+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.85V
16μA operating supply current
MAX8214AESE+ Applications
There are a lot of Maxim Integrated MAX8214AESE+ Voltage Supervisors applications.
- Efficient information transmission
- Kitchen appliances
- Military electronics
- Automotive permanent magnet synchronous motors
- Detection of phase sequence
- Smart meter
- Detection of phase imbalance
- Magnetic resonance imaging
- Detection of phase loss
- Low voltage/high power - AI, GPU
