MAX8214BESE+
| Parameters | |
|---|---|
| Output | Push-Pull, Totem Pole |
| Pin Count | 16 |
| Number of Channels | 5 |
| Max Supply Voltage | 11V |
| Min Supply Voltage | 2.85V |
| Operating Supply Current | 16μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 5Adjustable Threshold Voltages |
| Number of Voltages Monitored | 5 |
| Reset Timeout | <1ms Minimum |
| Supply Current-Max (Isup) | 0.033mA |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | TIN |
| Additional Feature | 4 PRECISION VOLTAGE COMPARATOR FOR UNDERVOLTAGE/OVERVOLTAGE MONITORING |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX8214 |
MAX8214BESE+ Overview
This voltage supervisor has a total of 16 mounting terminals that can be used for mounting. Tube-packaging is used. As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 5 channels. As a reference, this IC power includes 16-SOIC (0.154, 3.90mm Width) functions for your convenience. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. There is a specification for the peak reflow temperature of the package to be 260. When a supply voltage of 5V is applied to the power ic, it conducts. A supply voltage of 5 is used to conduct the PMIC chip. The power management is mounted by Surface Mount. A total of 16 pins are located on this power management. 16 pins are on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2.85V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 11V volts. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 16μA. There are other features such as 4 PRECISION VOLTAGE COMPARATOR FOR UNDERVOLTAGE/OVERVOLTAGE MONITORING to name a few. To find similar IC managements from the manufacturer, you can always search by MAX8214.
MAX8214BESE+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.85V
16μA operating supply current
MAX8214BESE+ Applications
There are a lot of Maxim Integrated MAX8214BESE+ Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Battery cars
- Functional modules
- Consumer electronics
- Stable power system
- Electronics installed in the vehicle
- Detection of phase loss
- Analog circuit
- Embedded computing
- Power distribution systems of operating room
