MAX8215CPD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | TIN LEAD |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX8215 |
| Output | Open Drain or Open Collector |
| Pin Count | 14 |
| Number of Channels | 5 |
| Max Supply Voltage | 11V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 250μA |
| Max Supply Current | 250μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Voltage - Threshold | ±5V ±12V Adj |
| Number of Voltages Monitored | 5 |
| Reset Timeout | 20μs Typical Propagation Delay |
| Undervoltage Threshold | -4.348V |
| Overvoltage Threshold | -4.482V |
| Width | 7.62mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX8215CPD+ Overview
This voltage supervisor has a total of 14 mounting terminals that can be used for mounting. There is a Tube-packaging method applied to IC management. For your reference, this IC power includes a list of 1 functions. A series of 5 channels can be found on this supervisor. To assist you, this PMIC includes 14-DIP (0.300, 7.62mm) functions. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 245 for the package during reflow. In a 5V supply voltage, the power management conducts. During operation, the power ic is supplied with a voltage of 5. By Through Hole, IC management has been mounted. In total, IC powers are 14 pins on the board. Pin count of the power management is 14. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2.7V, which is the minimum supply voltage that should be applied. There should be no more than 11V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Through Hole type of mounting. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. The supervisor's supply current is specified to 250μA. To find similar IC managements from the manufacturer, you can always search by MAX8215. A maximum supply temperature of 250μA can be used with this power management.
MAX8215CPD+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
250μA operating supply current
MAX8215CPD+ Applications
There are a lot of Maxim Integrated MAX8215CPD+ Voltage Supervisors applications.
- Set top box
- Consumer electronics
- Radar
- Household appliances
- Utility meter
- Battery cars
- DSP
- Rechargeable batteries
- Radio
- Cloud computing
