MAX821SUS+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | DETECTION THRESHOLD VOLTAGE IS 2.93 V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | MAX821 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 5.5μA |
| Max Supply Current | 5.5μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Min Reset Threshold Voltage | 2.89V |
| Max Reset Threshold Voltage | 2.96V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.89V |
| Overvoltage Threshold | 2.96V |
| Length | 2.92mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX821SUS+T Overview
This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. In this IC management you will find TO-253-4, TO-253AA functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. Taking into account all of the pins, this power management has a total of 4. 4 pins are on the supervisor. Supply voltage (Vsup) should be at least 1V for this power management. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. For this power management, there is an 5.5μA volt supply current. As well as this, there are other features to mention such as [0], for example. It is always advisable to use MAX821, the base supervisor number, when searching for similar PMICs from the manufacturer. At most, voltage supervisor can operate at a supply temperature of 5.5μA.
MAX821SUS+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
5.5μA operating supply current
MAX821SUS+T Applications
There are a lot of Maxim Integrated MAX821SUS+T Voltage Supervisors applications.
- Solar power charger
- Detection of phase loss
- Utility meter
- FPGA design
- Detection of phase sequence
- Radio
- Electrical fire monitoring system
- Sensitive sensors
- Embedded computing
- Display equipment
