MAX822RUS+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | DETECTION THRESHOLD VOLTAGE IS 2.63 V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | MAX822 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 5.5μA |
| Max Supply Current | 5.5μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Min Reset Threshold Voltage | 2.59V |
| Max Reset Threshold Voltage | 2.66V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.59V |
| Overvoltage Threshold | 2.66V |
| Length | 2.92mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX822RUS+T Overview
This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. A Tape & Reel (TR) package is used to package the power management. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes TO-253-4, TO-253AA functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. A supply voltage of 1 is used to conduct the PMIC chip. By Surface Mount, IC management has been mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 4 pins on the board. 4 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The power management's supply current is 5.5μA. In addition, IC management are other features such as [0], to mention only a few. A similar IC managements number of the manufacturer can always be found by using MAX822, the base power ics number. At most, voltage supervisor can operate at a supply temperature of 5.5μA.
MAX822RUS+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
5.5μA operating supply current
MAX822RUS+T Applications
There are a lot of Maxim Integrated MAX822RUS+T Voltage Supervisors applications.
- Important electronics for automotive protection
- Network equipment
- Transformer load monitoring equipment
- Magnetic resonance imaging
- Military electronics
- Medical-specific insulation monitor
- Power communication system
- Microcontroller system
- Microprocessor system
- Efficient information transmission
