MAX823ZEXK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 247mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX823 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Power Supplies | 2.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 4μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.32V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.28V |
| Max Reset Threshold Voltage | 2.35V |
| Undervoltage Threshold | 2.28V |
| Overvoltage Threshold | 2.35V |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX823ZEXK+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of 5-TSSOP, SC-70-5, SOT-353 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 2.5V is used to conduct the PMIC chip. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Using Surface Mount, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 5 pins on IC management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. There is a 4μA supply current present in the power management. For similar manage ics search of the manufacturer, you can always refer to MAX823, the base PMIC number. There is a requirement for 2.5V power to power this power management.
MAX823ZEXK+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
4μA operating supply current
MAX823ZEXK+T Applications
There are a lot of Maxim Integrated MAX823ZEXK+T Voltage Supervisors applications.
- Fire equipment power monitoring system
- Satellite navigation
- Dash board
- Personal computers
- Refrigeration
- Display equipment
- Automotive power systems
- Analog circuit
- Important electronics for automotive protection
- Microcontroller system
