MAX824REXK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 247mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | MAX824 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Power Supplies | 3/3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 4μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.59V |
| Max Reset Threshold Voltage | 2.66V |
| Undervoltage Threshold | 2.59V |
| Overvoltage Threshold | 2.66V |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX824REXK+T Overview
A total of 5 terminals are used to mount this power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. The purpose of this IC management is to provide you with a reference of 1 functions. Power management consists of 1 channels, each of which can be used independently. Please find attached 5-TSSOP, SC-70-5, SOT-353 functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 3V-voltage supply. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 5 pins. There are 5 pins on the power managment ic. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The supply current of the power management is 4μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX824, which is the base power ics number. The power management must be powered by 3/3.3V volts to function properly.
MAX824REXK+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
4μA operating supply current
MAX824REXK+T Applications
There are a lot of Maxim Integrated MAX824REXK+T Voltage Supervisors applications.
- Detection of phase sequence
- Telecommunications equipment
- DVR
- Military communications
- Low voltage/high power - AI, GPU
- Urban rail transit weak current power monitoring
- Leakage protection
- WiFi router
- Microprocessor system
- Detection of phase loss
