MAX824SEUK-T
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | MAX824 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 5μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.89V |
| Max Reset Threshold Voltage | 2.96V |
| Undervoltage Threshold | 2.89V |
| Overvoltage Threshold | 2.96V |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.63mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 571mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
MAX824SEUK-T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes SC-74A, SOT-753 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. According to the specification, the package's peak reflow temperature is specified to be 245. The supervisor is always powered by a 3.3V volt supply. IC management conducts in a 1-voltage supply. The mount is provided by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. In total, it has 5 pins on IC management. Pin count of the power management is 5. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a supply current of 5μA for the power management. To find similar IC managements from the manufacturer, you can always search by MAX824. A power supply of 3.3V watts is required for the operation of this power management.
MAX824SEUK-T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
5μA operating supply current
MAX824SEUK-T Applications
There are a lot of Maxim Integrated MAX824SEUK-T Voltage Supervisors applications.
- Multi-voltage system
- FPGA design
- Military communications
- Data storage applications
- Dash board
- Radar
- Important electronics for automotive protection
- Microprocessor system
- Refrigeration
- Smart meter
