Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
571mW |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
MAX825 |
Output |
Push-Pull, Totem Pole |
Pin Count |
5 |
Power Supplies |
5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.2V |
Operating Supply Current |
4.5μA |
Power Dissipation |
571mW |
Adjustable Threshold |
NO |
Watchdog Timer |
No |
Reset |
Active High/Active Low |
Voltage - Threshold |
4.63V |
Number of Voltages Monitored |
1 |
Reset Timeout |
140ms Minimum |
Min Reset Threshold Voltage |
4.56V |
Max Reset Threshold Voltage |
4.7V |
Threshold Voltage |
+4.63V |
Undervoltage Threshold |
4.56V |
Overvoltage Threshold |
4.7V |
Length |
2.9mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX825LEUK+T Overview
As you can see, this power management is mounted through 5 terminals. Power management is packaged in a Tape & Reel (TR) way. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes SC-74A, SOT-753 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Packages are specified to have an average peak reflow temperature of 260. IC management conducts at a voltage of 5V. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. There is a subcategory called Power Management Circuits for this power management. Taking into account all of the pins, this power management has a total of 5. 5 pins are present on the power management system. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 4.5μA volt supply current. For similar manage ics search of the manufacturer, you can always refer to MAX825, the base PMIC number. To operate this power management, you will need at least 5V volts of power.
MAX825LEUK+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
4.5μA operating supply current
MAX825LEUK+T Applications
There are a lot of Maxim Integrated MAX825LEUK+T Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Medical-specific isolation transformer
- Detection of phase imbalance
- Consumer electronics
- Important electronics for automotive safety
- Electronics installed in the vehicle
- Data storage applications
- Kitchen appliances
- Power communication system
- Urban rail transit weak current power monitoring