MAX825MEUK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 571mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX825 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 4.5μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.38V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.31V |
| Max Reset Threshold Voltage | 4.45V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.31V |
| Overvoltage Threshold | 4.45V |
| Length | 2.9mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX825MEUK+T Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. In this PMIC, you can find 1 functions for your reference. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Packages are specified to have an average peak reflow temperature of 260. In a 5V supply voltage, the power management conducts. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 5 pins on IC management. 5 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The supervisor's supply current is specified to 4.5μA. To find similar IC managements from the manufacturer, you can always search by MAX825. To be able to work, this power management requires 5V volts of power.
MAX825MEUK+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
4.5μA operating supply current
MAX825MEUK+T Applications
There are a lot of Maxim Integrated MAX825MEUK+T Voltage Supervisors applications.
- Power distribution systems of infant care room
- Unattended substation automation
- Embedded computing
- Automotive permanent magnet synchronous motors
- Detection of phase imbalance
- DSP
- Medical-specific isolation transformer
- Network equipment
- Linux and server computing
- Battery cars
