MAX825TEXK+T
| Parameters | |
|---|---|
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.006mA |
| Min Reset Threshold Voltage | 3.04V |
| Max Reset Threshold Voltage | 3.11V |
| Threshold Voltage | +3.08V |
| Undervoltage Threshold | 3.04V |
| Overvoltage Threshold | 3.11V |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 247mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | MAX825 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 2μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 3.08V |
MAX825TEXK+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. In this IC power you will find 1 functions for you to refer to. Power management consists of 1 channels, each of which can be used independently. There are 5-TSSOP, SC-70-5, SOT-353 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 5 pins in it. 5 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. Supplied with a operating current of 2μA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX825, which is the base power ics number. The voltage supervisor requires a power source of 3.3V volts in order to work correctly.
MAX825TEXK+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
2μA operating supply current
MAX825TEXK+T Applications
There are a lot of Maxim Integrated MAX825TEXK+T Voltage Supervisors applications.
- Power distribution systems of infant care room
- Transformer load monitoring equipment
- Important electronics for automotive safety
- Personal computers
- Electric heating appliances
- Detection of phase loss
- Electrical fire monitoring system
- DVR
- Radio
- Rechargeable batteries
