MAX850ISA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM -0.5V TO 9V |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | MAX850 |
| JESD-30 Code | R-PDSO-G8 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | -9V |
| Output Type | Adjustable (Fixed) |
| Voltage - Input (Min) | 4.5V |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 5V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Nominal Supply Current | 2mA |
| Output Configuration | Negative |
| Current - Output | 5mA |
| Voltage - Output (Min/Fixed) | -1.28V -4.1V |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Frequency - Switching | 100kHz |
| Synchronous Rectifier | No |
| Switcher Configuration | DOUBLER INVERTER |
| Max Duty Cycle | 50 % |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX850ISA+ Overview
As a result of the use of the Tube package, the performance of this voltage regulator is optimized. In this voltage regulator, there are 8 terminations. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHED CAPACITOR REGULATOR-type IC. Space-saving 8-SOIC (0.154, 3.90mm Width) packages are available for this harley voltage regulator. There are 1 outputs on DC DC switching regulator. ICs such as this voltage regulator are capable of generating Adjustable (Fixed) outputs through their output pins. The voltage regulator 12v fits the Surface Mount mounting hole. Operating at -25°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. DC-DC switching regulators reach 100kHz switching frequencies. The voltage regulator can operate with a dc to dc voltage regulator's minimum input voltage of 4.5V. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to -1.28V -4.1V. Featuring a 5mA output current, dc to dc voltage regulator offers maximum design flexibility. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. DC/DC regulators such as this one belong to the MAX850 family of products. At -9V volts, voltage regulator can provide voltage. In this case, a dc to dc voltage regulator's minimum supply voltage of 5V volts is required to ensure reliable performance. This harley voltage regulator is more efficient and stable due to its ALSO OPERATES IN ADJUSTABLE MODE FROM -0.5V TO 9V feature. A maximum supply voltage of 10V can be used to operate the voltage regulator 12v.
MAX850ISA+ Features
1 outputs
Peak reflow temperature (Cel) of 260
ALSO OPERATES IN ADJUSTABLE MODE FROM -0.5V TO 9V
MAX850ISA+ Applications
There are a lot of Maxim Integrated MAX850ISA+ Voltage Regulators applications.
- SMT equipment
- Television equipment
- Large fire protection systems
- Mobile phones
- Geothermal power
- Hydraulic presses
- Servo drive system
- Electrical power transmission
- Window air conditioners
- Thermal power
