MAX8543EEE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX8543 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 11.88V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 13.2V |
| Input Voltage-Nom | 13.2V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 3mA |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 3V~13.2V |
| Control Features | Current Limit, Enable, Power Good, Soft Start |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 800kHz~1.2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1.2MHz |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX8543EEE+ Overview
This switching controller fits most application requirements since it is packaged in a 16-SSOP (0.154, 3.90mm Width) package. The dc motor controller is adquate to generate for 1 outputs. Packaged in solid enclosures, this pmic has a Tube rating. Transistor Driver dc switching's outputs (s) can be handled by it. 3V~13.2V is the supply voltage and the operating voltage of the dc control. A -40°C~85°C TA dc switcher is not a problem. Switching can be done at 800kHz~1.2MHz with this switching controller. dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Current Limit, Enable, Power Good, Soft Start which allows efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminals (s) are designed at DUAL. An array of 16 terminations of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 13.2V. In addition to "MAX8543", there are other relevant dc to dc converter ics you can find. The switching converter has a total of 16 pins. Input voltage of dc dc voltage regulator must be 3V. Statistically, the DC regulator outputs 11.88V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 25A. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulator has a maximum frequency of 1.2MHz. To operate the voltage regulator dc to dc safely and reliably, users should apply 13.2V. A supply current of 3mA is used to power it.
MAX8543EEE+ Features
Transistor Driver Outputs
Switching Frequency: 800kHz~1.2MHz
Current Limit, Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
MAX8543EEE+ Applications
There are a lot of Maxim Integrated MAX8543EEE+ DC to DC converter applications.
- Domestic water pumps
- Overvoltage protection circuits in TV sets
- Photovoltaic power
- Various precision measuring instruments
- Wide-range voltage regulation circuits
- Medical monitoring systems
- Shearing machines
- Magnetohydrodynamic power
- Servo drive system
- Window air conditioners
