MAX8545EUB+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 300kHz |
| Base Part Number | MAX8545 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 23.24V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1.2mA |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 2.7V~28V |
| Control Features | Enable |
| Input Voltage (Min) | 2.7V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 86 % |
| Duty Cycle (Max) | 86% |
| Clock Sync | No |
| Height | 950μm |
| Length | 3.05mm |
| Width | 3.05mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX8545EUB+ Overview
The switching controller fits in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package and is ideal for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Packaging for the pmic consists of Tube solid enclosures. Transistor Driver dc switching's outputs (s) can be handled by it. 2.7V~28V is the supply voltage and the operating voltage of the dc control. Qualified to work in a -40°C~85°C TA dc switcher. dc dc regulator is made easier with Surface Mount. For efficient switching control, the dcdc regulator features Enable. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Switching converters are designed with the terminal (s) at position DUAL . A variety of terminations with 10 of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 5V. You can find other relevant dc to dc converter ics by searching "MAX8545". Total pins of switching converter are 10. There is a particular type of Switching Regulator or Controllers in switching converter. This dc dc voltage regulator should be powered by a voltage of 2.7V. According to the test statistics, DC regulator outputs 23.24V voltage. Considering the dc to dc regulator can only accept 5.5V input voltage, it is important to take note of this. In most cases, the dc dc regulator's output current is 15A. This information should be noted when you begin working with the component. It is set to 86 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. The Surface Mount makes DC switcher suitable for most applications and prototypes. Switching controller operates at a frequency of 300kHz. It runs on a supply current of 1.2mA.
MAX8545EUB+ Features
Transistor Driver Outputs
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 86 %
Frequency: 300kHz
MAX8545EUB+ Applications
There are a lot of Maxim Integrated MAX8545EUB+ DC to DC converter applications.
- Direct power supply system
- PSRR circuits
- Special machining machine tools
- Fire elevators
- Electrical distribution systems
- Plate bending machines
- CNC system
- Wind power
- Textile machinery
- Digital video recorders
